Electrolux ARCTIS 818 35 94-01/2 - Manual (Page 8)

8 818 35 94-01/2
Before Use
Packaging
0
1. Remove all adhesive tape and packaging from the interior of the appli-
ance.
3 Any remnants of adhesive can be removed with white spirit.
2. Remove the transport protection pieces and pull off the adhesive tape.
3. Wash the inside of the appliance with lukewarm water with a little
bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap
or detergent as the smell may linger. Dry the appliance thoroughly.
Fitting the Door Handle
1
Caution! Do not overtighten the screws (max. 2 Nm) as you may
damage the door handles.
0
1. Screw the top handle bracket to the
handle rod (1). Fit the bottom han-
dle bracket on the lower left-hand
side of the door (2).
2. Fit the top handle bracket on the
top left-hand side of the door (3)
and screw the handle rod to the
bottom handle bracket (4).