Epson 3880 - Manual (Page 7)

6
Windows Clients Printing to a Windows RIP Server
ColorBurst supports 32-bit versions of Windows 7, Windows Vista ® , and
Windows XP. Other versions of Windows, including 64-bit versions, are
not supported.
Note: Make sure the ColorBurst RIP is shared on the server.
1. Make sure the network is set up and the ColorBurst RIP is running.
2. Windows 7 or Windows Vista: Click > Control Panel > Devices
and Printers ( or Hardware and Sound) > Printers .
Windows XP: Click Start > Control Panel > Printers and Faxes .
3. Windows 7 or Windows Vista: Click Add a Printer . Then select the
Networ k option.
Windows XP: Click Add a Printer , then click Next . Select the
Network option, then click Next .
4. Windows 7 or Windows Vista: Select the ColorBurst RIP printer, then
click Next . Follow the instructions on the screen to install the driver.
Windows XP: Select Connect to this printer (browse for a printer) ,
then click Next. Browse the network and select the ColorBurst shared
printer, then click Next .
5. Leave the default name or enter a new name in the Printer name box.
Then click Next .