Electrolux 14700 VIT - Manual (Page 55)

55
Building-in
This appliance has been designed to
be built into the kitchen furniture.
The recess should have the dimen-
sions shown in picture A.
Preparation and assembly of the door
The machine is originally pre-
arranged for the assembly of a
door opening from right to left.
In this case it is sufficient to screw
in the hinges (1) and the counter-
magnet (6) provided with the appli-
ance, at the right level (Fig. B).
a) Door
The dimensions of the door should
be:
- width
595-598 mm
- thickness 16-22 mm
The height (C-Fig. C) depends on the height of the adjacent furniture's base.
b) Hinges
To mount the hinges it is necessary to
drill two holes (dia. 35 mm, depth
12.5-14 mm) on the inner side of the
door. The distance between the holes
hobs fixing centres must be 416 mm.
The distance (B) from upper edge of
the door to the centre of the hole
depends on the adjacent furniture's
dimensions.
The required dimensions are given in the picture C.
The hinges will be fixed to the door by means of screws for wood (2-Fig. B)
supplied with the appliance.
820 min
570 min.
600
596
41
6
176
,
5
81
8
541 195
160
120
90
8
515
5 A
600
4
1 2
3
6
1
2
3
5
7
8
B
35 Ø 12.5-14 depth
16-22
B
C
22+1,5
595-598
41
6
C
132992090bis.qxd 23/07/2003 11:29 Pagina 55 (Nero/Process Black pellicola)