Eureka 79ADV - Manual (Page 5)

Dust
Cup
Crevice Tool
(On the back)
5
Identify Parts
Socket
Charger
Wall Mount
Bracket
Screws and
Cavity Wall
Anchors
Motor
Filter
Dust Cup
Latch
On/Off
Switch
Charger Plug
USING THE VACUUM CLEANER
1. To switch on, move the on/off switch forward toward the dust container.
2. To switch off, move the on/off switch backward toward the handle.
To Use the Crevice Tool
1. Locate crevice tool on the bottom of the cleaner.
2. Grasp the end of the crevice tool nozzle and rotate out until it stops.
3. Then push the crevice tool firmly into the end of the cleaner nozzle.
4. After use, to store crevice tool pull the crevice tool out from the cleaner
nozzle.
5. Rotate back into the bottom of the cleaner until it snaps into place.
End of the
crevice tool
nozzle.