Electrolux pmn - Manual (Page 19)

Installation Instructions
39
Electrical Connection
• The mains connection terminals are on the underside of the appli-
ance, behind a cover. The hob is to be connected in accordance with
the connection diagram as a function of the mains supply present...
• The earth conductor is connected to the terminal, the earth wire
must be longer than the current carrying wires. If necessary, the
bridges on the terminal block must be changed as appropriate.
• The cable connections must be made in accordance with regula-
tions and the terminal screws fully tightened.
• The connecting cable is then to be secured using the strain relief
clamp.
1 • Following connection to the mains supply, all cooking zones are to be
switched on, at the maximum setting, one after the other for approx.
30 seconds to check that they function correctly.
Connection Diagram 230 V ~
230 V~
2 N~
1 2 3 4 5
230 V~
L1 N PE
1 2 3 4 5
230 V~
230 V~
L2 L1 N PE