DigiPower Re-Fuel ActionPack Battery for HERO11/10/9 Black Editions User Manual

Page 12

ENGLISH

PASS THRU POWER

Pass thru power allows you to record indefinitely and

keep your battery charged up at the same time.

1. Open the USB-C port door as noted on page 3 .

2. Connect the USB-C cable to a power source such as a

USB car charger, wall charger, or power bank

3. You do not need to press the power button on the

ActionPack, it starts working automatically.

4. Operate the camera as you normally would

REMOVING YOUR CAMERA FROM THE

ACTIONPACK CASE AFTER IT HAS BEEN

IN WATER

1. Visually inspect the camera, dry off any residual

water found before opening the case.

2. Unlatch the casing and pivot the frame away from

the camera.

3. Remove the camera by sliding it out of the Action-

Pack frame.

4. Visually look for any water around the USB-C port on

the camera; dry it off immediately.