Connecting video and audio inputs, To connect video and audio inputs to your monitor, Connecting power – eMachines E216T5W User Manual
Page 7: To connect power, Adjusting monitor tilt, To adjust your monitor’s tilt
www.emachines.com
3
Connecting video and audio inputs
To connect video and audio inputs to your monitor:
1
Position your computer and the monitor so you can reach the back of each.
2
Connect the VGA video cable to the VGA video connector under the back of the display.
3
Make sure that your computer is turned off, then connect the other end of the video cable
to the matching video port on the back of your computer.
4
Connect the speaker (green) cable from the speaker jack on the monitor to your computer’s
audio out jack.
Connecting power
To connect power:
1
Position your monitor so you can reach the back, then connect the power cord to the power
connector under the back of the monitor.
2
Plug the power cord into a correctly grounded power outlet. We recommend using a surge
protector to protect your monitor from voltage spikes.
Adjusting monitor tilt
To adjust your monitor’s tilt:
•
Adjust the tilt of the monitor for your viewing comfort.
Video cable
Audio cable
Power outlet
Power cable