Vicoustic VicSpacer Plus with 8-PET Panels (Matte Gray, 4-Pack) - Manual (Page 17)

EN
10
B
A
3
Wall installation - Two units
3.1
When installing two or more VicSpacer side by side, use only one
metal joint (side plate) between them, fixed to one of the structure
with the screws provided (only on positions A and B).
The contact plywood strip of the right side unit has to be rotated 180°
so that the fixing nuts face the same direction and allow tightening
between VicSpacers with the screws provided (H).
3.2
Steps Material
L
F
After defining the place where you want to install the VicSpacers,
start marking the position of the fixation clips as described on pages
6 and 7 of the manual -
Ways of using the gauge F.