Vicoustic VicWallpaper VMT Acoustic Wallpaper Symmetric (Light Gray, 23.43 x 23.43 x 0.39", 8-Pack) User Manual
Page 7
EN
Wall and ceilling surfaces should be examined prior to installation, ensuring they are clean, smooth, and dry. If
you have unpainted gypsum board surfaces, these should be primed with a drywall primer (or another material
manufactured especially for the purpose), to equalize the absorption between the gypsum board face paper,
joint compound, and skin coating materials. You should then apply the paint, and allow air circulation in order to
dry the paint within the time frame specified by the paint manufacturer. Please ensure the paint is dry before
installing the acoustic panel. Make sure the room has all the necessary conditions to receive the acoustic
panels. After you apply the glue on the back of each acoustic panel, please ensure you hold the acoustic panel
against the wall the required time (mentioned above), and ensure it stays fixed in place.
This method is also applicable to ceiling installations.
For the installation of VicWallpaper VMT on the ceiling, we recommend
using Flexi Glue Ultra.
!
Do not apply VicWallpaper VMT behind radiators or too close to a heat
source.