Packing specification, 265 nozzle （adventurer 4 equipped – FlashForge Adventurer 4 3D Printer (FFF) User Manual
Page 4
3D Printer
Filament
After-Sales
Service Card
Screwdriver
0.4-265 Nozzle
（Adventurer 4 Equipped）
Quick Start Guide
Unclogging
Pin Tool
Power Cable
Grease
Allen Wrench
Filament Guide
Tube Joint
Leveling Card
USB Disk
Packing Specification
02
快速启动指南
Adventurer 4 / 冒险家4
Quick Start Guide
EN/CN/DE/FR/ -A01
本手册仅适用于闪铸科技 冒险家4 3D打印机
This guide is only applicable to FLASHFORGE Adventurer 4 3D printer
WARNING
注意事项
1. Do not remove the wrapping around the nozzle.
2. Hot! Avoid touching the heating nozzle in operation.
3. Moving parts in printer may cause injury. Do not
wear gloves or other sources of entanglement in
operation.
1. 切勿去除包裹在喷嘴处的耐高温材料。
2. 高温危险！打印机喷嘴在工作时会被加热，操作时请避免
接触!
3. 可动部件可能会造成卷入挤压和切割伤害。操作机器时请
不要配带手套或缠绕物。
EN P01 / CN P06 / DE P11 / FR P16 / P21