Nikon SB-500 AF Speedlight - Manual (Page 68)

H
- 1
H
Tips on Speedlight Care and Reference Information
This section explains troubleshooting, Speedlight care, specifications
and optional accessories.
Troubleshooting
If the flash-ready indicator flashes slowly, or any trouble occurs, use
the following chart to determine the cause of the problem before
taking the Speedlight to a retailer or Nikon-authorized service
representative for repair.
Problems with the SB-500
Problem Cause Solution 0
The power
cannot be
turned on.
The batteries are not
correctly installed. Insert the batteries
correctly.
B-9
Battery power is weak. Replace the batteries. B-11
The flash-ready
indicator does
not light up.
The standby function is
activated.
• Press the camera
shutter-release button
halfway.
• Set the SB-500’s power
switch to any mode
other than [OFF].
• Press the SB-500’s test
firing button.
F-8
Battery power is weak. Replace the batteries. B-11
The power switch is set
to [
].
• Normal operation
• The flash-ready
indicator does not flash
when the LED light is
in operation, except for
warning indications.
—
Tips on Speedlight Care and Reference Information
H