FujiFilm EF-60 Shoe Mount Flash - Manual (Page 23)

Flash Head Operations
Bounce
Light Diffusing Panel
• Manually turn the flash head vertically
and horizontally.
• The head rotates 90 ° upward, 180 ° to
the left and 180 ° to the right.
By pulling out the Light Diffusing
Panel and covering it in front of
the flash head as shown in the
figure, a shooting angle of view of
16 mm can be supported.
When you bounce the flash mainly
by reflecting flash light on the
ceiling or walls indoors, you can
soften the unnatural shadows of
the subject and make them look
natural.
• When bouncing, the flash coverage is fixed at 50 mm when
auto zoom is set. (except for radio wireless remote)
• If the distance to the ceiling or wall is long, the flash light may
not be reflected sufficiently and the effect may not be obtained.
• The flash light during bounce shooting may be colored due to
the influence of the color of the ceiling and walls.
• When bouncing, the light is attenuated. If the effect is not
sufficiently obtained, adjust the exposure setting such as
increasing the ISO sensitivity of the camera.
Caution !