Avenview 8K DisplayPort 1.4 Male Fiber Optic Cable (230') - Manual (Page 7)

www.avenview.com Page 4
2.2 PACKAGE CONTENTS
Before you start the installation of the converter, please check the package contents.
2.3 BEFORE INSTALLATION
• Use the product in a stable location. If the product falls or drops, it may pull connected equipment causing
them to fall.
• Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
• Do not twist or pull by force ends of the optical cable. It can cause malfunction.
3. OPTICAL FIBER HAZARD
• Persons installing fiber optic products must take all necessary safety precautions, such as wearing
protective clothing and goggles and observing warning signs.
• To ensure that the required personnel and equipment is properly installed, secure from unnecessary failure
of the components or failure of the whole system, injury to one’s self and in addition to legal responsibility;
everyone is responsible for his own health
• Keep exposed optical fiber ends away from skin and eyes.
• The waste fragments should be treated with care and not picked up with bare hands, but rather with special gloves.
• Dispose of waste in a suitable container via an approved agency. Make sure that the quantity of optical fiber
waste is minimized.
• Closures containing termination points for optical fiber cabling must be labeled with appropriate warning
signs or clearly visible text.
• Make sure that the quantity of optical fiber waste is minimized. Closures containing termination points for
optical fiber cabling must be labeled with appropriate warning signs or a clearly viewable text.
• There are four laser Classifications based on risk levels. laser manufacturers are required to label their lasers
accordingly.
1
DisplayPort Extender Cable
X 1
2
U
ser’s Manual
X 1