Edimax Technology IC-1500 - Manual (Page 5)

3.3. Installation Procedure
1. Unpack the Internet Camera package and verify that all the
items listed in the Chapter 1 are provided.
2. Connect the Internet Camera to your network by attaching
the network cable from the switch/router to the UTP port of
the Internet Camera.
3. Connect the power adapter to the Internet Camera and plug
the power adapter to power outlet. The Internet Camera will
be powered on. When the Internet Camera is ready, the
Ready LED will show an orange color.
Note: It is highly recommended to use the power adapter shipped
with the Internet Camera, do NOT use any other power adapter
from any sources.
4. Software Installation
y
Follow the simple steps below to run the Install Wizard to
guide you quickly through the Installation process.
The following installation is implemented in Windows XP. The
installation procedures in Windows 98SE/Me/2000/Server 2003
are similar.
y
Insert the CD shipped along with the Internet Camera into
your CD-ROM drive. The “Autorun.exe” program should be
executed automatically. If not, run “Autorun.exe” manually
from “Autorun” folder in the CD.
y
The Install Wizard will show four selections, select the
“IC-1500 / Wg” on left side if you want to install now or click
“Exit” to install the program later.