Philips Fidelio L3 Noise-Canceling Wireless Over-Ear Headphones - Manual (Page 6)

3 Get started
Charge the battery
Note
 Before you use your headset for the first time,
charge the battery for 2 hours for optimum
battery capacity and lifetime.
 Use only the original USB charging cable to
avoid any damage.
 Finish your call before charging the headset,
as connecting the headset for charging will
power the headset off.
Connect the supplied USB charging
cable to:
• The USB type C charging slot on the
headphones and;
• The charger/USB port of a
computer.
Tip
 Normally, a full charge takes 2 hours.
Pair the headphones with
your mobile phone
Make sure that the headphones are
fully charged and turned off.
Make sure that the mobile phone is
turned on and its Bluetooth feature
is activated.
The headphone remain in pairing
mode for 3 minutes.
Before you use the headphones with
your mobile phone for the first time, pair
it with a mobile phone. A successful
pairing establishes a unique encrypted
link between the headphones and
mobile phone. The headphones store
the last 8 devices in the memory. If you
try to pair more than 8 devices, the
earliest paired device is replaced by the
new one.
The following example shows you how
to pair the headphones with your mobile
phone.
LED turns white during charging and
turns off when the headphones in
fully charged.
Press and hold for 5 seconds until
the blue and white LED flashes
alternately.
Philips Fidelio L3
Pair the headphones with the mobile
phone. For detailed information,
refer to the user manual of your
mobile phone.
Activate the Bluetooth feature of
your mobile phone, select
Philips
Fidelio L3