Philips A7306 True Wireless In-Ear Sport Headphones - Manual (Page 6)

3 Get started
Charge the battery
Charging case
Earpieces
Note
 Before you use your earpieces for the first
time, place the earpiecess in the charging
case and charge the battery for 3 hours for
optimum battery capacity and lifetime.
 Use only the original USB charging cable to
avoid any damage.
 Finish your call before charging the earpieces,
as connecting the earpieces for charging will
power the earpieces off.
Connect one end of the USB cable into
the charging case, and another end into
the power source.
• Charging process is verified by the
white LED light next to the USB
socket on the case.
• When the charging case is fully
charged, the light goes off.
• Charging process is verified by white
LED light on the earpiecess.
• When the earpieces is fully charged,
the white light goes off.
Tip
Tip
 The charging case serves as a portable backup
battery for charging the earpieces. When the
charging case is fully charged, it supports 3 full
recharge cycle for the earpieces.
 Normally, a full charge takes 2 hours (for the
earpieces or charging case).
Pair the earpieces with
your Bluetooth device at
the first time
Place the earpieces in the charging case.
The earpieces start charging.
The LED on both earpiecess flashes
in blue for 3 times, and then it
flashes in white.
Both earpiecess are now power on
and are paired with each other.
The charging case starts charging.
Auto Power on: Open the charging
capsule, the earpiecess discharged
and the blue LED indicator flash
with “power on” voice prompt.
Manual Power on: On both earpiecess
press and hold the multi-function
buttons for approxinmately 2 seconds.
02"
1 second