Datavideo CM-10 Ceiling Mount for PTR-10 Mark II & PTR-10T Mark II Pan/Tilt Heads User Manual
Page 7
7
The dimensions diagram of the ceiling mount bracket B is shown below.
If your ceiling is made of concrete, then on the surface where the PTR
robotic pan tilt head is to be installed, drill six holes spaced according
to the dimensions indicated in the diagram above (
enclosed by six
rectangles
) then use the
six expansion bolts in your product package
to secure the ceiling mount bracket B to the ceiling.
If your ceiling is made of wood, then on the surface where the PTR
robotic pan tilt head is to be installed, drill four holes spaced according
to the dimensions indicated in the diagram above (
see the arc shaped
holes enclosed in a circle
) then use
four self-tapping screws
to secure
the ceiling mount bracket B to the ceiling.
Please note that self-
tapping screws are not provided in the product package.