Robus RCM-633 6-Section Carbon Fiber Monopod, 65 - Manual (Page 6)

Reversing the Mounting Screw
The monopod offers a reversible 3/8-16 and 1/4-20 mounting
screw.
1. Loosen the set screw with the included 2 mm
hex key.
2. Unscrew the baseplate until you can remove the
mounting screw and switch it to the other side.
3. Screw the baseplate back onto the monopod
until it’s secure, and tighten the set screw from
the top.