Westcott FJ400 Strobe 2-Light Location Kit with FJ-X3m Universal Wireless Trigger - Manual (Page 15)

Delay Function
The Delay function will add a delay to the firing of the FJ400 by a custom set amount of time.
1. Press Button 1 repeatedly until MENU 5 appears in the cyan square at the top right of the screen.
2. Press Button 3 (DELAY) to engage the Delay function. A bright yellow “Delay” icon will appear in
the lower left of the screen.
3. Press Button 4 to set the Delay timer. Repeatedly pressing Button 4 will cycle through the number
places on the display allowing the setting of the 1/10 or 1/100 second positions.
4. IMPORTANT: Turn off the Delay function by pressing Button 3 again to disengage the Delay and
return to standard strobe operation. The bright yellow “Delay” icon will disappear from the
screen.
Continuous Capture Function
The FJ400’s incredibly fast recycling times allow for it to be used to fire up to 20fps (frames per second).
1. Press Button 1 repeatedly until MENU 1 appears in the cyan square at the top right of the screen.
2. Press Button 2 until M appears just below the [CH] icon in the top left of the screen.
3. Press the Center Button on the Control Dial and rotate the dial to select a power setting between
1 and 4.
NOTE: 20fps is camera model dependent.
FJ400: Menu [Expanded Look]
Menu Screen #1
● MENU 1 ► Button 1
● MODE Icon ► Button 2
○ Pressing Button 2 switches between TTL (Through the Lens) and M (Manual) exposure
modes.
■ TTL Mode will allow for the flash exposure compensation value to be adjusted
between -3.0 and 3.0 in ±0.1 increments by turning the Control Dial.
■ MANUAL Mode will allow the power output to be adjusted between 1.0 and 9.0 in
±0.1 increments by turning the Control Dial.
■
● SYNC Icon ► Button 3
○ Pressing Button 3 switches between NOR (Normal), “Lightning-H” Icon (High-Speed Sync),
and FRE (Freeze) sync functions.
■ NOR (Normal Sync) allows for a constant color temperature of 5500K (±150K)
■ “Lightning-H” Icon (High-Speed Sync) allows for shutter speeds up to 1/8000s.
■ FRE (Freeze Sync) allows for adjustments to the flash duration up to 1/19000s by
rotating the Control Dial to change the FJ400 power output.
14