Interfit Badger Unleashed 2-Light Backpack Kit - Manual (Page 6)

Accessorizing the Badger Unleashed
Umbrellas
Umbrellas are the most widely used modifiers in photography. Their ease-of-use and versatility makes them
quick to master; a go-to modifier in many situations.
Umbrellas can be mounted to the Badger Unleashed using the umbrella tension mount on the bottom of
the flash unit. The shaft mount can accommodate the wide variety of Interfit brand umbrellas and parabolic
umbrellas as well as most umbrellas up to a 3/8” (8mm) diameter pole. Simply push the end of the umbrella
shaft into the umbrella tension mount hole until it slides through - the tension lock will hold it in place.
Sync Cable
Sync cables allow the flash to be triggered by the camera via physical tethered connection. While sync
cables are the most economical way to trigger a flash, they will not allow you to make any adjustments to
the flash from the camera. They will also not allow you to use HSS or TTL.
A sync cable is included with your Badger Unleashed and can be plugged into the sync port on the rear
right side of the flash unit and the corresponding sync port on your camera. To connect the cable to the
light, insert the 3.5mm (headphone jack) plug into the sync port on the light. Take the other end of the
cable and connect it to the PC terminal on your camera (*consult your camera user manual to locate the PC
terminal on your camera. Some camera models do not have a PC port and may require a separate adapter).
Remotes
The Badger Unleashed is compatible with all Interfit TTL Remotes as well as the Interfit Manual Remote.*
Using these remotes allows you to control all functions of the light wirelessly,
though only the Interfit TTL remotes will be able to activate and control the TTL
and HSS functions of the Badger Unleashed. The Interfit TTL remotes are brand-
specific and must correspond to the brand of camera being used. This remote
mounts to your camera’s hot shoe and communicates to the Badger Unleashed
unit without an additional receiver. Interfit Remotes are sold separately.
*Compatible remotes include:
-Interfit TTL Remote for Canon
-Interfit TTL Remote for Nikon
-Interfit TTL Remote for Sony
-Interfit Manual Remote (manual mode only)
Third Party Remotes
The Badger Unleashed is compatible with all third-party remotes using a receiver via sync cable. While these
remotes ie. PocketWizard or Yongnuo, will allow you to trigger the Badger Unleashed, they will not allow
you to make any power adjustments from the camera or use TTL or HSS. All power adjustments must be
done manually through the back of the light when using third-party remotes.
www.interfitphotographic.com 5