Usb connection – VIEWSONIC ColorPro 27" 4K HDR Monitor User Manual

Page 18

USB Connection

Connect one end of a USB cable to a USB port of the monitor. Then connect the

other end of the cable to a USB port of your computer.

NOTE:

The monitor supports four (4) types of USB ports. When making the

connection(s), observe the following guidelines:

• Four (4) USB Type A ports

: Connection for your Type A peripheral

device(s) (i.e. storage device, keyboard, mouse).

NOTE:

To use some peripherals, please ensure your computer is

also connected to the monitor’s USB Type B port.

• One (1) USB Type B port: Connect the USB Type B male cable (square

with 2 cut corners) to this port, and then connect the other end of the

cable to the USB downstream port of your computer.

• One (1) USB Type C ports: Make sure your Type-C output device and

cable support video signal transmission.

• One (1) Micro USB port: For use with the ColorPro Wheel.

Type-C

NOTE:

It is not necessary to connect to all three types of USB ports at the same

time. The user’s personal usage scenario will determine which, if any,

USB ports are used.