VIEWSONIC VX4381-4K 42.5" 16:9 4K HDR10 MVA Monitor - Manual (Page 10)

10
Initial Setup
Wall Mounting
NOTE: Only use UL Certified wall mount kits.
100 mm
Refer to the table below for the standard dimensions for wall mount kits.
Maximum
Loading
Hole pattern
(W x H)
Interface Pad
(W x H x D)
Pad Hole
Screw Specification
& Quantity
14 kg 200 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm
M4 x 10 mm
4 pieces
NOTE: Wall mount kits are sold separately. To obtain a wall mounting kit,
contact ViewSonic® or your local dealer.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down.
3. Remove the monitor stand.
4. Attach the mounting bracket to the VESA mounting holes at the rear of the
device. Then secure it with four (4) screws (M4 x 10 mm).
5. Follow the instructions that come with the wall mounting kit to mount the
monitor onto the wall.
200 mm