Philips 279P1 27" 4K Monitor with USB Type-C Docking - Manual (Page 21)

19
6. Power Delivery and Smart Power
6. Power Delivery and
Smart Power(279P1)
You can power your compatible device
with up to 90 Watts of power from this
monitor.
1 What is it?
Smart Power is an exclusive Philips
technology that provides flexible power
delivery options for various devices.
This is useful for recharging high
performance laptops with only one
cable.
With Smart Power, the monitor makes it
possible to deliver up to 90W of power
through the USB-C port, compared to
the standard 65W.
To prevent damaging the device, Smart
Power enables protections to limit
current draw.
2 How to enable Smart Power?

 
 
 



 
 



1. Press button on the front bezel to
enter OSD menu screen.
2. Press or button to select main
menu [Setup], then press button OK.
3. Press or button to turn on or off
the [Smart Power].
3 Power through USB-C port:
1. Connect the device to the USB-C
port.
2. Turn on [Smart Power].
3. If [Smart Power] is on, and USB-C
is used for power, then maximum
power delivery depends on the
brightness value of the monitor.
You may adjust the brightness value
manually to increase power delivery
from this monitor.
There are 3 power delivery levels:
Brightness
value Power Delivery
from USB-C
Level 1 0 ~ 20 90W
Level 2 21 ~ 60 85W
Level 3 61 ~ 100 80W
Note
• If [Smart Power] is on, and DFP
(Downstream Facing Port) is using
more than 5W, then USB-C can only
deliver up to 65W.
• If [Smart Power] is off, then USB-C
can only deliver up to 65W.
• PowerSensor and LightSensor
cannot be enabled with Smart
Power simultaneously.