4 multiclient integrated kvm – Philips 7000 34" 1440p HDR 165 Hz Curved Ultrawide Gaming Monitor (White) User Manual
Page 12
10
Note
VESA-Compliant mounting interface.
VESA Mounting Screw M4. Always
contact manufacturer for wall-mount
installation.
Warning:
This product is curve design, when
attach / detach the base, place the
protective material under the monitor
and do not press down the monitor to
avoid the damage.
-5°
0°
90°
* Display design may differ from those
illustrated.
Warning
•
To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
•
Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
2.4 MultiClient Integrated KVM
1
What is it?
With MultiClient Integrated KVM switch,
you can control two separate PCs with
one monitor-keyboard-mouse set up.
2
How to enable MultiClient Integrated
KVM
With the built-in MultiClient Integrated
KVM, Philips monitor allows to quickly
switch your peripherals back and forth
between in two devices through the OSD
menu setting.
Use USB-C and HDMI or DP as input,
then use USB-C/USB-B as USB upstream.
Please follow the steps for the settings.
1. Connect the USB upstream cable
from your dual devices to the “USB
C” and “USB UP” port of this monitor
at the same time.
Source
USB Upstream
HDMI/DP
USB UP
USB C
USB C
2. Connect peripherals to the USB
downstream port of this monitor.
PC1
PC2
HDMI 1
HDMI 2
USB UP
USBC
USB USB
PC1/PC2
1
1
2