Parts name and functions, Control panel, Y (see – NEC EA242WU 24" Monitor User Manual
Page 15: Parts oame and functions, English
English−13
English
Parts Oame and Functions
Control Panel
Item
Function
1
Ambient Light Sensor
Human Sensor
Detects the level of ambient lighting and the presence of a user, allowing the monitor to make adjustments to
various settings resulting in a more comfortable viewing experience. Do not cover this sensor.
2
INPUT/SELECT
Enters sub-menus in the OSD menu when the OSD menu is open.
Shows a switching menu for the input source when the OSD menu is closed.
You can directly change to the [L/B] (LOW BLUE LIGHT) mode by touching this key for 3 seconds or more when
the OSD menu is closed.*
1
3
MENU/EXIT
Opens the OSD menu. Closes the OSD sub-menus and main menu. You can restore the saved settings in the
[CUSTOMIZE SETTING] by touching this key for 3 seconds or more when the OSD menu is closed.
4
LEFT/RIGHT/
UP/DOWN*
2
When the OSD menu is open, navigates through the OSD menu.
When the OSD menu is closed, touch one of the following keys to open the menu for the function indicated.*
1
key: [BRIGHTNESS]
key: [VOLUME]
5
ECO/RESET
When the OSD menu is open, this key sends a reset command for the OSD settings.
When the OSD menu is closed, this key switches the [ECO MODE] status. You can set a mode from [OFF], [1]
and [2].*
1
6
⏻
Turns the monitor on and off.
7
Power LED
Indicates that the power is on or off.
*1: When the [HOT KEY] function is [OFF], this function is disabled.
*2: Depending on the [OSD ROTATION] setting, [LEFT], [RIGHT], [UP] and [DOWN] key guides are displayed at the , , , keys differently (see
).