MSI 27" PRO MP273AW Monitor (Matte White) - Manual (Page 18)

18
OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
Clock
(PRO MP273A/
PRO MP273AP/
PRO MP273AW)
0-100 ∙ Adjust Clock setting.
∙ For D-Sub only, this setting will be
grayed out when detecting other
input sources.
Phase
(PRO MP273A/
PRO MP273AP/
PRO MP273AW)
0-100 ∙ Adjust Phase setting.
∙ For D-Sub only, this setting will be
grayed out when detecting other
input sources.
H.Position
(PRO MP273A/
PRO MP273AP/
PRO MP273AW)
0-100 ∙ Adjust H.Position setting.
∙ For D-Sub only, this setting will be
grayed out when detecting other
input sources.
V.Position
(PRO MP273A/
PRO MP273AP/
PRO MP273AW)
0-100 ∙ Adjust V.Position setting.
∙ For D-Sub only, this setting will be
grayed out when detecting other
input sources.
Input Source
1st Level Menu 2nd Level Menu Description
HDMI™ ∙ Select an Input Source from the list.
DP
D-Sub
(PRO MP273A/ PRO MP273AP/
PRO MP273AW)
Auto Scan OFF ∙ Users can use the Navi Key to select Input
Source at below status:
• While “Auto Scan” is set to “OFF” with the
monitor at power saving mode;
• While “No Signal” message box is shown
on the monitor.
ON