MSI Optix G2712 27" 170 Hz Gaming Monitor - Manual (Page 18)

18
OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
MPRT OFF ∙ When MPRT is enabled,
Brightness cannot be enabled
and will be grayed out.
∙ HDCR and MPRT cannot be
enabled simultaneously.
∙ Response time will be grayed
out while MPRT is enabled.
∙ MPRT is available when the
refresh rate is over 85Hz.
∙ MPRT has to be disabled while
Adaptive-Sync is set to ON.
ON
Refresh Rate Location Left Top ∙ Location is adjustable in OSD
Menu. Press the OK Button
to confirm and apply your
Refresh Rate Location.
∙ This monitor follows and
works at the Operating
System’s preset Screen
Refresh Rate.
Right Top
Left Bottom
Right Bottom
OFF
ON
Alarm Clock Location Left Top ∙ After setting the time, press
the OK Button to activate the
timer.
∙ Users have to manually
restore their preset Alarm
Clock after any AC power loss
and reconnection.
Right Top
Left Bottom
Right Bottom
OFF
15:00
00:01 ~ 99:59
30:00
45:00
60:00
Screen Assistance None ∙ Users can adjust Screen
Assistance in any mode.