LG 27BK550Y-I 27" Monitor (Black) - Manual (Page 9)

9
ENG
ENGLISH
y Illustrations in this document represent typical
procedures, so they may look different from the
actual product.
y Do not carry the monitor upside down by just
holding the stand base. This may cause the
monitor to fall off the stand and could result in
personal injury.
y When lifting or moving the monitor, do not touch
the monitor screen. The force applied to the
monitor screen may cause damage to it.
y Do not apply foreign substances (oils, lubricants,
etc.) to the screw parts when assembling the
product. (Doing so may damage the product.)
y Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be covered
by the product warranty.
Mounting on a table
1 Lift and tilt the Monitor set into its upright
position on a table.
Leave a 100 mm (3.94 inches) space from the
wall for proper ventilation.
2 Connect the Power cord to the monitor, then
plug the power cord into the wall outlet.
3 Press the (Power) button on the front of the
monitor to turn on the monitor.
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
CAUTION
CAUTION
NOTE
y You can disassemble the stand in the reverse
order of the assembly.
y Unplug the power cord prior to moving or
installing the monitor. There is risk of electric
shock.