Lenovo G34w-10 34" 1440p 144 Hz Curved Gaming Monitor User Manual
Page 22
Installing the monitor driver in Windows 10
To use the Plug and Play feature in Microsoft Windows 10, do the following:
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to
boot into Windows 10 operating system.
4. From the Lenovo websi find the
corresponding monitor driver and download it to a PC to which this monitor is
connected (such as a desktop).
5. On the Desktop, move mouse to bottom-left corner of screen, right-click
choose Control Panel, then double click the icon of Hardware and Sound, and then
click Display.
6. Click the Change the display settings tab.
7. Click the
Advanced Settings
button.
8. Click the
Monitor
tab.
9. Click the
Properties
button.
10.
Click the
Driver
tab.
11.
Click Update Driver, then click Browse the computer to find the driver
program.
12.
Select “
Let me pick from a list of device drivers on my computer
”.
13.
Click the Have Disk button. By clicking the Browse button, browse and
point to the following path:
X:\Monitor Drivers\Windows 10
(Where X indicates "the folder in which the downloaded driver is located"
(such as a desktop)
14. Select the “
G34w
-10.inf
” file and click the
Open
button. Click the
OK
button.
15. In the new window, select
Lenovo
G34w
-10
and click Next.
16. After the installation is complete, delete all downloaded files and close all
windows.
17. Restart the system. The system will automatically select the maximum refresh
rate and corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 3440x1440 at a refresh rate of 144 Hz, or 640
x 480 at a refresh rate of 60 Hz.
Chapter 3
.
3-
5