Lenovo ThinkCentre Tiny-In-One 24 Gen 5 23.8" Multi-Touch Monitor with Webcam - Manual (Page 34)

Chapter 3. Reference information
This section contains monitor specifications, instructions to manually install the monitor
driver, troubleshooting information.
Disassembling your monitor
To disassemble your monitor, follow the four parts below one by one:
Part 1: Remove the Kensington-style cable lock (optional).
Part 2: Remove the rear Wi-Fi antenna (optional).
Part 3: Remove the Tiny.
Part 4: Remove the full-function monitor stand.
Part 1: Remove the Kensington-style cable lock (optional).
With the key of the Kensington-style cable lock, unlock the lock that is attached to the rear
panel of your computer.
Part 2: Remove the rear Wi-Fi antenna (optional).
1. Press the cable cover 1 to open it. Then, pivot the cable cover as shown to the open
position.
1
2
2. Pivot the rear Wi-Fi antenna downward at an angle of about 90°. Then, hold the thicker
end of the rear Wi-Fi antenna and unscrew it from the computer.
Part 3: Remove the Tiny.
1. Release the screw that secures the computer.
3-1 Flat Panel Monitor User’s Guide