Dell P2723QE 27" 4K UHD USB Type-C Hub Monitor - Manual (Page 37)

Setting up the monitor │ 37
Using DPBS function
Waking on the USB-C cable
When you connect the USB-C cable, the Monitor/PC state is as follows:
USB Type-C
USB Type-C
Initial system power state (ON)
Initial monitor power state (ON or Standby)
Initial monitor power state (ON or Standby)
New Power state of monitor (ON)
Connect USB-C cable
Connect USB-C cable
11 2 2
USB Type-C
USB Type-C
Initial system power state (OFF)
New Power state of monitor (ON)
*Not all Dell PC systems support to wake up
the platform via the monitor.
11 2 2
New Power state of system (ON) *
USB Type-C
New Power state of system (ON)
USB Type-C
No USB-C Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/P2723QE
No USB-C Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/P2723QE