Dell SE2722H 27" 16:9 LCD Monitor - Manual (Page 26)

26 │ Setting up the monitor
Setting up the monitor
Connecting the stand
NOTE: The stand is detached when the monitor is shipped from the
factory.
NOTE: The following procedure is applicable for the stand that shipped
with your monitor. If you are connecting a third-party stand, see the
documentation that shipped with the stand.
To attach the monitor stand:
1. Follow the instructions on the flaps of packaging box to remove the stand from
the top cushion that secures it.
2. Connect the stand base to the stand riser.
1 2
3. Slide the tabs on the stand assembly into the slots on the monitor and press the
stand assembly down to snap it into place.
1 2