Acer CB322QK semipruzx 31.5" 4K UHD HDR Display - Manual (Page 23)

10
Battery and remote control instructions
Inserting batteries
Before using the TV set for the first time, insert two “AAA” batteries. When the batteries are low, and the
remote control does not work, replace with new “AAA” batteries.
1 Uncover the battery
compartment.
2 Inser t two “AAA” batteries 3 Cover the battery compartment.
Caution
Not using the batteries properly may cause a leakage of chemical substances or explosion. The following instructions
must be followed.
• Do not use mixed batteries of different types. Batteries of different types have different characteristics.
• Do not use mixed new and old batteries. If new batteries are used with old ones, the service life of the new ones will
be shortened,or it may cause a leakage of the chemical substances in the old batteries.
• When the batteries are low, take out the batteries immediately. The chemical substances leaked from the battery
may corrode the parts in the battery compartment. If a leakage of any chemical substance is found, use a cloth to
thoroughly clean the chemical substance.
• If the remote control will not be used for a long time, take out the batteries from the remote control.
• Do not expose the batteries to direct sunlight, fire or other overheating environments.
1 Uncover the battery compartment.
• When inserting the batteries, note that
the polarities of the batteries should
match the polarities marked (e) and (f)
on the battery compartment.
2 Insert two “AAA” batteries 3 Cover the battery compartment.
When using the remote control, point it to the remote sensor.
If there is an object between the remote control and the
sensor window, normal operations may be prevented.
Precautions regarding the remote control
Inserting batteries
Using the remote control
Before using the TV set for the first time, insert two “AAA” batteries. When the batteries are low, and the remote control
does not work, replace with new “AAA” batteries.
• Do not subject the remote control to violent vibration.
In addition, do not dip the remote control in liquids, or place the remote
control in a highly humid place.
• Never set up or place the remote control under direct sunlight.
Heat may cause deformation of the remote control.
• When the TV set’s remote sensor is under direct sunlight or strong
lighting, the remote control may fail. If this occurs, change the lighting or
angle of the LCD TV set, or operate the remote control near the sensor.
Caution
Not using the batteries properly may cause a leakage of chemical substances or explosion. The following instructions
must be followed.
• Do not use mixed batteries of different types. Batteries of different types have different characteristics.
• Do not use mixed new and old batteries. If new batteries are used with old ones, the service life of the new ones will
be shortened,or it may cause a leakage of the chemical substances in the old batteries.
• When the batteries are low, take out the batteries immediately. The chemical substances leaked from the battery
may corrode the parts in the battery compartment. If a leakage of any chemical substance is found, use a cloth to
thoroughly clean the chemical substance.
• If the remote control will not be used for a long time, take out the batteries from the remote control.
• Do not expose the batteries to direct sunlight, fire or other overheating environments.
1 Uncover the battery compartment.
• When inserting the batteries, note that
the polarities of the batteries should
match the polarities marked (e) and (f)
on the battery compartment.
2 Insert two “AAA” batteries 3 Cover the battery compartment.
When using the remote control, point it to the remote sensor.
If there is an object between the remote control and the
sensor window, normal operations may be prevented.
Precautions regarding the remote control
Inserting batteries
Using the remote control
Before using the TV set for the first time, insert two “AAA” batteries. When the batteries are low, and the remote control
does not work, replace with new “AAA” batteries.
• Do not subject the remote control to violent vibration.
In addition, do not dip the remote control in liquids, or place the remote
control in a highly humid place.
• Never set up or place the remote control under direct sunlight.
Heat may cause deformation of the remote control.
• When the TV set’s remote sensor is under direct sunlight or strong
lighting, the remote control may fail. If this occurs, change the lighting or
angle of the LCD TV set, or operate the remote control near the sensor.
Caution
Not using the batteries properly may cause a leakage of chemical substances or explosion. The following instructions
must be followed.
• Do not use mixed batteries of different types. Batteries of different types have different characteristics.
• Do not use mixed new and old batteries. If new batteries are used with old ones, the service life of the new ones will
be shortened,or it may cause a leakage of the chemical substances in the old batteries.
• When the batteries are low, take out the batteries immediately. The chemical substances leaked from the battery
may corrode the parts in the battery compartment. If a leakage of any chemical substance is found, use a cloth to
thoroughly clean the chemical substance.
• If the remote control will not be used for a long time, take out the batteries from the remote control.
• Do not expose the batteries to direct sunlight, fire or other overheating environments.
1 Uncover the battery compartment.
• When inserting the batteries, note that
the polarities of the batteries should
match the polarities marked (e) and (f)
on the battery compartment.
2 Insert two “AAA” batteries 3 Cover the battery compartment.
When using the remote control, point it to the remote sensor.
If there is an object between the remote control and the
sensor window, normal operations may be prevented.
Precautions regarding the remote control
Inserting batteries
Using the remote control
Before using the TV set for the first time, insert two “AAA” batteries. When the batteries are low, and the remote control
does not work, replace with new “AAA” batteries.
• Do not subject the remote control to violent vibration.
In addition, do not dip the remote control in liquids, or place the remote
control in a highly humid place.
• Never set up or place the remote control under direct sunlight.
Heat may cause deformation of the remote control.
• When the TV set’s remote sensor is under direct sunlight or strong
lighting, the remote control may fail. If this occurs, change the lighting or
angle of the LCD TV set, or operate the remote control near the sensor.
• When inserting the batteries,
note that the polarities of the
batteries should match the
polarities marked (e) and (f) on
the battery compartment.
Caution
Not using the batteries properly may cause a leakage of chemical substances or explosion. The following instructions
must be followed.
• Do not use mixed batteries of different types. Batteries of different types have different characteristics.
• Do not use mixed new and old batteries. If new batteries are used with old ones, the service life of the new ones will
be shortened,or it may cause a leakage of the chemical substances in the old batteries.
• When the batteries are low, take out the batteries immediately. The chemical substances leaked from the battery
may corrode the parts in the battery compartment. If a leakage of any chemical substance is found, use a cloth to
thoroughly clean the chemical substance.
• If the remote control will not be used for a long time, take out the batteries from the remote control.
• Do not expose the batteries to direct sunlight, fire or other overheating environments.
1 Uncover the battery compartment.
• When inserting the batteries, note that
the polarities of the batteries should
match the polarities marked (e) and (f)
on the battery compartment.
2 Insert two “AAA” batteries 3 Cover the battery compartment.
When using the remote control, point it to the remote sensor.
If there is an object between the remote control and the
sensor window, normal operations may be prevented.
Precautions regarding the remote control
Inserting batteries
Using the remote control
Before using the TV set for the first time, insert two “AAA” batteries. When the batteries are low, and the remote control
does not work, replace with new “AAA” batteries.
• Do not subject the remote control to violent vibration.
In addition, do not dip the remote control in liquids, or place the remote
control in a highly humid place.
• Never set up or place the remote control under direct sunlight.
Heat may cause deformation of the remote control.
• When the TV set’s remote sensor is under direct sunlight or strong
lighting, the remote control may fail. If this occurs, change the lighting or
angle of the LCD TV set, or operate the remote control near the sensor.
Caution
Not using the batteries properly may cause a leakage of chemical substances or explosion. The following
instructions must be followed.
• Do not use mixed batteries of different types. Batteries of different types have different characteristics.
• Do not use mixed new and old batteries. If new batteries are used with old ones, the service life of the
new ones will be shortened,or it may cause a leakage of the chemical substances in the old batteries.
• When the batteries are low, take out the batteries immediately. The chemical substances leaked from
the battery may corrode the parts in the battery compartment. If a leakage of any chemical substance is
found, use a cloth to thoroughly clean the chemical substance.
• If the remote control will not be used for a long time, take out the batteries from the remote control.
• Do not expose the batteries to direct sunlight, fire or other overheating environments.
Inserting batteries
When using the remote control, point it to the remote sensor. If there is an object between the remote
control and the sensor window, normal operations may be prevented.
Precautions regarding the remote control
• Do not subject the remote control to violent vibration.
In addition, do not dip the remote control in liquids, or place the remote
control in a highly humid place.
• Never set up or place the remote control under direct sunlight.
Heat may cause deformation of the remote control.
• When the TV set’s remote sensor is under direct sunlight or strong
lighting, the remote control may fail. If this occurs, change the lighting or
angle of the LCD TV set, or operate the remote control near the sensor.
Caution
Not using the batteries properly may cause a leakage of chemical substances or explosion. The following instructions
must be followed.
• Do not use mixed batteries of different types. Batteries of different types have different characteristics.
• Do not use mixed new and old batteries. If new batteries are used with old ones, the service life of the new ones will
be shortened,or it may cause a leakage of the chemical substances in the old batteries.
• When the batteries are low, take out the batteries immediately. The chemical substances leaked from the battery
may corrode the parts in the battery compartment. If a leakage of any chemical substance is found, use a cloth to
thoroughly clean the chemical substance.
• If the remote control will not be used for a long time, take out the batteries from the remote control.
• Do not expose the batteries to direct sunlight, fire or other overheating environments.
1 Uncover the battery compartment.
• When inserting the batteries, note that
the polarities of the batteries should
match the polarities marked (e) and (f)
on the battery compartment.
2 Insert two “AAA” batteries 3 Cover the battery compartment.
When using the remote control, point it to the remote sensor.
If there is an object between the remote control and the
sensor window, normal operations may be prevented.
Precautions regarding the remote control
Inserting batteries
Using the remote control
Before using the TV set for the first time, insert two “AAA” batteries. When the batteries are low, and the remote control
does not work, replace with new “AAA” batteries.
• Do not subject the remote control to violent vibration.
In addition, do not dip the remote control in liquids, or place the remote
control in a highly humid place.
• Never set up or place the remote control under direct sunlight.
Heat may cause deformation of the remote control.
• When the TV set’s remote sensor is under direct sunlight or strong
lighting, the remote control may fail. If this occurs, change the lighting or
angle of the LCD TV set, or operate the remote control near the sensor.