List of safety symbols and instructions – Epson Moverio BT-45CS AR Smart Glasses with Intelligent Controller User Manual
Page 34
General Notes
34
List of Safety Symbols and Instructions
The following table lists the meaning of the safety symbols la-
beled on the equipment.
No. Symbol Mark
Approved
Standards
Description
A
IEC60417
No.5007
Power ON
Indicates the product is connected
to the power supply.
B
IEC60417
No.5008
Power OFF
Indicates the product is discon-
nected from the power supply.
C
IEC60417
No.5009
Standby
Indicates a switch or its position
for supplying power to only a part
of the equipment or device or, and
placing the equipment or device
in standby mode.
D
ISO7000
No.0434B
IEC3864-B3.1
Caution
Indicates general precautions to
be followed when handling the
product.
E
IEC60417
No.6042
ISO3864-B3.6
Caution (risk of electric shock)
Indicates that the equipment
or device poses a risk of electric
shock.
No. Symbol Mark
Approved
Standards
Description
F
IEC60417
No.5957
Indoor use only
Indicates that the electronic
equipment or device is intended
for indoor use only.
G
IEC60417
No.5926
DC power connector polarity
Indicates the positive and nega-
tive electrodes of the device that
can be connected to a DC power
supply.
H
IEC60417
No.5017
Grounding
Indicates that this is a grounding
(earth) terminal.
I
IEC60417
No.5032
Alternating current
Indicates that the equipment
or device is suitable for alternat-
ing current only, and to identify
terminals that support alternating
current.
J
IEC60417
No.5031
Direct current
Indicates that the equipment or
device is suitable for direct current
only, and to identify terminals that
support direct current.