Epson DC-07 Document Camera - Manual (Page 8)

Top/Side/Rear
Name Function
A Camera head s "Camera Head" p.9
B Foot Extend the foot when installing.
C Camera arm Extends or retracts to adjust the height of the camera
head.
D Security slot The security slot is compatible with the Microsaver
security system manufactured by Kensington.
E [Freeze] button Freezes live images. Press the button again to resume
projection. The indicator turns on when the image is
frozen. The audio does not stop.
Name Function
F [Focus] button Focuses the image automatically.
The document camera cannot focus on objects that
are approximately 10 cm (4 inches) or less from the
surface of the camera lens.
If you want to adjust the white balance, press and
hold this button for approximately five seconds.
G [ z ] [ x ] buttons Enlarges or reduces the image without changing the
projection size.
H
[ ] button
Turns the LED lamp on or off.
I [Source Search] button Changes the image projected from the projector.
When multiple devices are connected to the
projector, press the button repeatedly until the
image you want to display is shown. This is not
available when the document camera is connected to
a computer.
J Power indicator This indicator comes on when power is supplied
from a projector or computer.
K USB port (type B) Connects the document camera to a projector or
computer using the USB cable supplied.
L Flicker Reduction switch Change to 50Hz or 60Hz according to the power
frequency in the area you live. This reduces
flickering in images.
M Mic switch Set this to Off to disable input from the internal
microphone. This should usually be set to On.
Document Camera Parts
8