StarTech.com VS222HD4K 2 x 2 HDMI 4K Matrix Switch with Fast Switching and Auto-Sensing (Black) - Manual

1. Input selection button for output 1
2. Input selection button for output 2
3. Mode selection switch
4. IR sensor
Quick Install Guide
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 06/24/2015
For the latest information, technical specifications, and support for
this product, please visit www.startech.com/.
Packaging contents
• 1 x 2x2 HDMI matrix switch
• 1 x remote control
• 1 x universal power adapter (NA/EU/UK/AU)
• 1 x RJ11 cable
• 1 x RJ11 to DB-9 serial adapter
• 1 x quick start guide
System requirements
• 2 x HDMI enabled Video Source Device w/ HDMI cable (i.e. Blu-ray
player, computer, etc.)
• 2 x HDMI enabled Display Device w/ cable (i.e. Television, projector,
etc.)
Operating system requirements are subject to change. For the latest
requirements, please visit www.startech.com/VS222HD4K.
VS222HD4K
2x2 HDMI® matrix switch - 4K
*actual product may vary from photos
Installation
Note: Ensure your HDMI enabled video source devices, and
the HDMI enabled displays are powered off before you begin
installation.
1. Connect two HDMI cables (not included) from each of the HDMI
output ports on your HDMI source devices, to the HDMI input
ports on the HDMI switch.
Notes: Each port is numbered, please take note of which number
is assigned to each HDMI source device.
2. Connect two HDMI cables (not included) from the output ports
on the HDMI Switch to your HDMI displays.
3. Power on your HDMI displays, followed by each of your HDMI
source devices.
4. Connect the included power adapter from an available power
source to the power adapter port on the HDMI switch.
5. (Optional for serial control) Connect the included RJ11 cable to
the RJ11 to DB-9 serial adapter. Then connect the D9 connector to
a 9-pin serial port on your computer system.
6. Your HDMI matrix switch is now ready for operation.
Operation
Automatic operation
The HDMI switch features automatic operation that allows the switch
to automatically select the most recently activated or connected
HDMI source device.
Simply connect a new device or turn on an already connected device
to automatically switch video sources.
Priority operation
The HDMI switch features priority operation which will prioritize port
1 and port 2 respectfully. Select a prioritized Video Input device that
will automatically be selected when a video source is turned on.
Port 1 will automatically be displayed on your display devices while
it is turned on. Turning off the device will automatically switch back
to port 2.
Manual operation
Manual mode enables you to switch between video sources with
push button operation.
Product overview
Front View
Rear View
1. Power adapter port
2. RJ-11 serial jack
3. EDID copy button
4. EDID audio / video selection switch
5. HDMI output ports (out1 and out2)
6. HDMI input ports (in1 and in2)