beautypg.com

StarTech.com HDMI and USB over Cat5e/6 Distribution Kit User Manual

Page 8

background image

Instruction Manual

5

d) (Optional) If you are using additional ST12MHDLANUR receivers (sold separately),

repeat steps [a) through c)] for each additional receiver.

Note:

The rotary dip switches on the transmitter and each receiver connected to the

network must be set in the same position for the devices to communicate.

3. Connect the devices to a Gigabit LAN network
a) Connect an RJ-45 terminated Cat5e or Cat6 Ethernet cable to the LAN port on the

transmitter unit, and to each of the receiver units.

b) Connect the other end of the Cat5e or Cat6 cable to a Gigabit LAN hub, router or

switch.

Note:

Your router must support IGMP snooping. Please refer to your network switch or

router documentation to ensure IGMP snooping is supported and enabled.

4. Verify that the image from your video source appears on video display(s) attached

to the receiver unit(s).

(Additional receiver units sold separately, StarTech.com SKU: ST12MHDLANUR)