StarTech.com 2-Port High Resolution VGA Video Splitter with Audio (400 MHz, Gray) User Manual

Page 4

Introduction

Thank you for purchasing a StarTech.com video and audio splitter. Now you’ll be able to
broadcast the audio and video signals from one PC over multiple sound systems and
monitors. The built-in video amplifiers let you place your monitors up to 210 ft (65m)
away and still experience crystal-clear video signals with resolution up to 2048 x 1536
pixels. These switches are also daisy-chainable for future expansion and are compatible
with a wide range of monitors.

Features

• Allows one computer to provide simultaneous displays on two (ST122PROA), four

(ST124PROA), or eight (ST128PROA) different monitors with audio support

• Works with VGA, SVGA, XGA, QXGA, UXGA and Multisync monitors

• Provides a high video bandwidth (400 Mhz) for crystal clear 2048 x 1536 resolution

• Daisy chainable for almost unlimited expansion

• Uses a built-in video signal amplifier which allows a cable length of up to 210 ft

(65m)

• Uses standard monitor extension cables (StarTech.com coaxial VGA cables

recommended for best picture quality)

• Compatible with DDC, DDC2 & DDC2B (on Video Out port 1)

Before You Begin

To ensure a quick and easy device installation, please read through this section carefully
before attempting to install the device.

Requirements

• Computer with a HD-15 video port and a mini-stereo audio port

• VGA, SVGA, XGA, QXGA, UXGA or Multisync monitors with HD-15 connectors

• HD-15 monitor cables (like StarTech.com’s coaxial high-resolution video cables)

• Speakers or earphones with mini-stereo plugs

• Mini-stereo audio cables

Contents
This package should contain:

• 1 x Video splitter with audio

• 1 x Power adapter