beautypg.com

Installation, Hardware installation – StarTech.com ST122DVIA 2 Port DVI Video Splitter with Audio User Manual

Page 7

background image

4

Installation

Hardware Installation

Make sure all devices are powered off and unplugged.

1.

Connect the DVI video source (i.e. computer, HDTV box, etc.) to

2.

the Input connector on the splitter, using a standard male/male DVI
cable. If using audio, also connect a 3.5mm mini-jack audio cable
from the video source to the Input connector on the splitter.

NOTE:

3.

Use of DVI-D cables is recommended as some DVI video

sources may default to using an analog signal, when a DVI-I cable
is used.
Connect the DVI display device (i.e. monitor, HDTV, projector, etc.)

4.

to one of the Output connectors on the splitter, using standard
male/male DVI cables. If using audio, also connect a 3.5mm mini-
jack audio cable from the Output connector to the display device/
speakers.
Repeat for each display device or port on the splitter.

5.

ST122DVIA

ST124DVIA

Power on the display devices first. At least one display device must

6.

be connected to the splitter, before powering it on, to ensure proper
operation.
Connect power to the DVI splitter to power it on. The Power LED will

7.

light up green.