Specifications, Measurements – SPL PQ Mastering Equalizer (Red) User Manual
Page 13
12
Specifications
Measurements
Inputs
Max. Input Level ..................................... + 32,5 dBu
Input Inpedance ..................................... 20 kOhms (balanced)
Outputs
Max. Output Level .................................. + 32,5 dBu
Output Inpedance .................................. ‹ 600 ohms (balanced
Harmonic Distortion: at -30 dBu: 0,2%
at -20 dBu: 0,05%
at 0 dBu: 0,01%
at +10 dBu: 0,002%
at +30 dBu: 0,0005%
Noise (unweighted, at 24 dBu, Band 1-5 ON, B/C = 0) ................................ - 91,2 dBu
Noise (A-weighted, at 24 dBu, Band 1-5 ON, B/C = 0) ................................ - 94,3 dBu
Noise (CCIR, at 24 dBu, Band 1-5 ON, B/C = 0) ........................................... - 85,77 dBu
THD & N (at 24 dBu, Constant-Q) ............................................................... › 107,1 dB
THD & N (at 24 dBu, Porportional-Q) .......................................................... › 106,1 dB
Common-Mode-Rejection:..........................................................................›-82dBu
(at 1 kHz, Max. Gain +34 dBu, Band 1-5 ON, B/C = 0)
Transmission Bandwidth: 10 Hz-100 kHz
(-3 dB, Band 1-5 ON, B/C = 0)
Frequency Range: 10 Hz-24 kHz
Power Consumption: ............................... 0,4 Amp, 230V/50Hz, 61 Watt, 92 VA
0,8
Amp,
115V/60Hz,
61
Watt,
92
VA
Fuses ..................................................... 230 V/50 Hz: 3,15 Amp
115
V/60
Hz:
6,3
Amp
Dimensions
Standard EIA 19 Inch Housing/4U ............ 482 x 177 x 311,5 mm / ca. 19“ x 7“ x 12,25“
Weigh ..................................................... 15,2 kg / 33,5 lb