Exmark Ultra Vac - Manual (Page 8)

8
2. SPECIFICATIONS
2.1 MODEL NUMBER:
LHPUV4448
Use with drive kit:
44” deck – 103-1315
48” deck – 103-1313 (Lazer Z HP Serial Nos. below 203,376)
48” deck – 103-1314 (Lazer Z HP Serial Nos. 203,376 & higher)
Note: Lazer Z HP model LHP4818KC Serial Nos. below 176621 will also require adapter kit 130-0328
LHPUV52
Use with drive kit:
52” deck – 103-1317
LZUV52
Use with drive kit:
52” deck – 103-1076
Note: Lazer Z models with serial numbers below 260,000 will also require adapter kit 103-1369.
LZUV60
Use with drive kit:
Lazer Z with 60” deck – 103-0466
Lazer Z XP with 60” deck – 103-1112
LZUV72
Use with drive kit:
Lazer Z with 72” deck – 103-0903
Lazer Z XP with 72” deck – 103-1113
Note: Lazer Z models with serial numbers below 260,000 will also require adapter kit 103-0538.
2.2 DIMENSIONS
2.2.1 Overall unit length w/ Ultra Vac
Lazer Z HP Lazer Z XP
44" Deck 91.76" (233.1 cm) 60" Deck 107.90" (274.1 cm)
48" Deck 91.76" (233.1 cm) 72" Deck 112.00" (284.5 cm)
52" Deck 93.00" (236.2 cm)
Lazer Z - Air Cooled Lazer Z - Liquid Cooled
52" Deck 105.70" (268.5 cm) 52" Deck 106.00" (269.1 cm)
60" Deck 106.65" (270.9 cm) 60" Deck 106.90" (271.5 cm)
72" Deck 110.75" (281.3 cm) 72" Deck 111.00" (281.9 cm)
2.2.2 Overall unit width w/ Ultra Vac
Lazer Z HP Lazer Z and Lazer Z XP
44" Deck 58.47" (148.5 cm) 52" Deck 66.85" (169.8 cm)
48" Deck 61.73" (159.8 cm) 60" Deck 74.44" (189.1 cm)
52" Deck 66.47" (168.8 cm) 72" Deck 86.49" (219.7 cm)
2.3 BAGGING SYSTEM
2.3.1 Weight: Lazer Z HP -110 lbs. (50 kg)
Lazer Z and Lazer Z XP – 52” Deck – 220 lbs. (100 kg) includes weight kit
60” Deck – 290 lbs. (132 kg) includes weight kit
72” Deck – 237 lbs. (108 kg) includes weight kit
2.3.2 Collections bins: Commercial grade, cloth mesh bags with reinforced bottoms.
Capacity: All Lazer Z HPs and Lazer Z 52” - 8 bushels (2 bags and hood)
All 60 and 72” decks – 13.4 bushels (3 bags and hood)
2.3.3 Dump Mechanism: Manual lift off
2.3.4 Blower tube: fixed, abrasion resistant molded polyethylene
2.3.5 Impeller: 5-bladed, 0.25” thick abrasion resistant steel, with vertical axis.
Impeller bearings: 1” (2.54 cm) sealed “non-greaseable bearings”