Energy Speaker Systems HomeTheater System - Manual (Page 12)

WARNING
IMPORTANT TECHNICAL NOTE
PLEASE READ BEFORE OPERATING SPEAKERS
THE WARRANTY ON SPEAKERS IS VOID IF THE VOICE COILS ARE BURNED OR
DAMAGED AS RESULT OF OVERPOWERING OR CLIPPING.
OVERPOWERING: The volume control of most amplifiers and receivers is a
logarithmic type, which means that full power may be reached with the volume
control at as little as the halfway point. In addition, operating the loudness feature or
boosting the treble or bass controls increases power output well beyond rated levels.
AS A RESULT OF THE ABOVE FACTORS, A 30 WATT AMPLIFIER CAN PRODUCE
OUTPUT LEVELS OF OVER 100 WATTS AND MAY DAMAGE YOUR LOUDSPEAKER.
CLIPPING: Clipping refers to the power level at which an amplifier begins to distort
a waveform by flattening its top and bottom into a square wave-shape.When fed to
tweeters and/or midrange speakers, this may result in exceeding their maximum power
handling capacity, causing damage to the speaker voice coil.
CLIPPING CAN BE IDENTIFIED BY A FUZZY OR DISTORTED SOUND. IF THIS IS
HEARD, LOWER THE VOLUME IMMEDIATELY TO AVOID DAMAGE TO YOUR SYSTEM.
CONTINUOUS CLIPPING WILL DAMAGE OR BURN OUT THE SPEAKERS.
H o m e T h e a t e r S y s t e m s o w n e r s m a n u a l
11