beautypg.com

Bluetooth, Pairing voltage selection instructions – Samson RS112a 12" 400W 2-Way Active Loudspeaker User Manual

Page 9

background image

1. Turn the BLUETOOTH/AUX IN Volume control

down counterclockwise to 0.

2. With the RS Loudspeaker and your Bluetooth

device powered on, quickly press and
release the Pair button on the rear panel of
the RS Loudspeaker to make the speaker
discoverable. The Bluetooth indicator will
slowly flash blue.

3. In the settings of your Bluetooth device, set it

to “discover” available devices.

4. From the Bluetooth device list, select the

“Samson BLUETOOTH” device.

5. If your device asks for a passkey, enter digits

0000 (four zeros) and press OK. Some
devices may also ask you to accept the
connection.

6. The RS Loudspeaker speaker indicates that pairing is complete when the indicator turns

steady blue. You can now stream audio from your device to the RS Loudspeaker.

7. With the volume control on your Bluetooth device turned up, play some music, and slowly

raise the RS Loudspeaker BLUETOOTH/AUX IN Volume control until you have reached the
desired level.

Following are step-by-step instructions
for changing the mains voltage of the RS
Loudspeaker.

WARNING: Before carrying out this operation,
remove the power cord!

1. Insert a small screwdriver into the slot

beneath the fuse sled and gently press
in and up. The fuse sled will pop out
approximately 3/8” inch.

2. Remove fuse sled.

3. Remove the fuse. Replace with the

correct fuse for your region.

4. Rotate the fuse sled and line up the

arrow on the AC inlet with the correct
voltage for your region.

5. Push the fuse sled into the AC inlet

until fully seated.

Bluetooth

®

Pairing

Voltage Selection Instructions

USE ONLY WITH A 250V FUSE

EMPLOYER UNIQUEMENT

AVECUN FUSIBLE DE 205V

220–240

110–120

USE ONL

Y WITH

A 250V FUSE

EMPLOYER UNI

QUEMENT

AVECUN FUSIBLE DE

205V

220–240

110–120

USE ONLY WITH

A 250V FUSE

EMPLOYER UNIQUEMENT

AVECUN FUSIBLE DE

205V

220–240

110–120

USE ONLY WITH

A 250V FUSE

EMPLOYER UNIQUEMENT

AVECUN FUSIBLE DE 205V

220–240

110–120

USE ONLY WITH A 250V FUSE

EMPLOYER UNIQUEMENT

AVECUN FUSIBLE DE 205V

220–240

110–120

9

RS112A / RS115A

This manual is related to the following products: