Samson Stage Series PXD1 Beltpack Transmitter (No Microphone, No Receiver) - Manual (Page 8)

8
Computer Setup
Windows
1.
The first time you plug the
XPD2 into a USB port,
Windows will install the USB
driver for that port.
2. To set the XPD2 as your default
input/recording device, or
to change its settings, open
the Control Panel, Hardware
& Sound settings, then click
SOUND. Under Recording
tab, select the “Samson RXD
Wireless Receiver” from the list
of devices and press the
Set
Default button to set it as the default audio input device.
3. To set the gain of the microphone, click the Properties button, and
then select the Levels tab. Slide the control until the desired level is
reached.
Apple MAC OSX
1.
Plug the RXD2 receiver into an available USB port.
2. Select the XPD2 as the computer’s audio input, open System
Preferences from the dock or the main Apple Menu.
3. Next, open the Sound preferences, choose the Input tab and select
“Samson RXD Wireless Receiver”. To set the gain of the microphone,
adjust the Input volume slider at the bottom of the Sound dialog box.
The Input Level meter will show the recording level.