Start the machine, At the end of the programme – Electrolux FWM 1010 User Manual
Page 8
8
6. Start the machine
Before starting up the machine check that:
●
the appliance is plugged in
●
the water supply tap is turned on
●
the drain hose is correctly and securely positioned
●
the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF
button: the mains-on light will
illuminate and the machine starts operating.
7. At the end of the programme
The machine stops automatically.
If you have depressed the RINSE HOLD
button, the
machine will stop with the water left in the tub, to
prevent the fabric from creasing.
To drain the water and spin, release the same button.
To drain only, select programme “P”.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.
When the programme has finished you are advised to
unplug the appliance and turn off the water tap.
Remove the laundry from the drum and carefully check
that the drum is empty.
If you do not intend to carry out another wash, close the
water tap. Leave the door open to prevent the formation
of mildew and unpleasant smells.
P0471S
ON/OFF