Electrolux 44070 i - Manual (Page 26)

26
Notes for Test Institutes
Testing in accordance with EN 60704 must be carried out with the
appliance fully loaded and using the test cycle (see “Cycle Table”).
Tests in accordance with EN 50242 must be carried out when the salt
dispenser in the water softener and the rinse aid dispenser have been
filled with salt and rinse aid respectively, and using the test cycle (see
“Cycle Table”).
Sample loading arrangements:
Full load:
12 place settings
including serving dishes Half load:
6 place settings including serving
dishes, leaving alternate positions
in the rack free
Amount of detergent
required:
5g + 25g (Type B) 20g (Type B)
Rinse aid setting: 4 (Type III) 4 (Type III)
Upper basket
*)
*) If necessary, move the cup rack from right to left. When doing this, ensure that the
cup rack is at the same height.