Xiaomi Robot Vacuum S10 - Manual (Page 12)

11
Remove the mop pad from the mop pad holder. Wash it and let it air dry.
Mop Pad
1. Remove the side brush.
2. Press and hold the clips to remove the brush cover, then remove the
brush, and pull out the brush bearing.
3. Use the cleaning brush to clean.
Brush and Side Brush
Cleaning the Brush
Cut the hair Remove dirt and debris
Clip
Brush Cover
Brush
Brush Bearing
Side Brush
Press and hold the
clips to remove.
Cliff Sensor
It is recommended to clean the cliff sensor and IR receiver sensor every
Sensor