Xiaomi Redmi 10 2022 - Manual (Page 10)

between the unit and the human body. This device should be carried at least
5 mm away from the body to ensure RF exposure level is compliant or lower
than the reported level. When attaching the device near the body, a belt clip
or holster should be used which does not contain metallic components and
allows a separation of at least 5 mm to be maintained between the device
and the body. RF exposure compliance was not tested or certified with any
accessory containing metal worn on the body, and use of such an accessory
should be avoided.
Certification Information (Highest SAR)
SAR 10 g limit: 2.0 W/Kg,
SAR Value: Head: 0,581 W/Kg, Body: 0,944 W/Kg (5 mm distance).
Legal Information
Observe national and local regulations where the device is used.
This device is restricted to indoor use only when operating in the 5150 to
5350 MHz frequency range in Hong Kong and UK:
UK
Ensure the power adapter used meets the requirements of Clause 6.4.5 in
IEC/EN 62368-1 and has been tested and approved according to national or
local standards.
Frequency Bands and Power
This mobile phone offers the following frequency bands in EU areas only and
maximum radio-frequency power:
GSM 900: 35.5 dBm
GSM 1800: 32.5 dBm
WCDMA band 1/8: 25.7 dBm
LTE band 1/3/7/8/20/28/38/40: 25.7 dBm
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz band: 20 dBm
Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to
5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm
NFC: 13.56 MHz < 42 dBuA/m at 10m
E-label
This device has an electronic label for certification information.
To access it, please go to Settings > About phone > Certification, or open
Settings and type “Certification” into the search bar.
Model: 22011119UY
2201 indicates that this product will be launched after 202201.