Xiaomi Pad 5 - Manual (Page 8)

During SAR testing, this device was set to transmit at its highest certified
power level in all tested frequency bands.
When attaching the device near the body, a belt clip or holster should be used
which does not contain metallic components. RF exposure compliance was
not tested or certified with any accessory containing metal worn on the body,
and use of such an accessory should be avoided.
Certification Information (Highest SAR)
SAR 10 g limit: 2.0 W/Kg,
SAR Value: Body: 0.350 W/Kg (0 mm distance).
Legal Information
Observe national and local regulations where the device is used.
This device is restricted to indoor use only when operating in the 5150 to 5350
MHz frequency range in Hong Kong and UK:
UK
Receiver Category 2
Ensure the power adapter used meets the requirements of Clause 6.4.5 in
IEC/EN 62368-1 and has been tested and approved according to national or
local standards.
Frequency Bands and Power
This tablet offers the following frequency bands in EU areas only and
maximum radio-frequency power:
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz band: 20 dBm
Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to
5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm
Wireless reverse charging: 145 KHz < 42 dBuA/m at 10m Distance
E- label
This device has an electronic label for certification information.
To access it, please go to Settings > About tablet > Certification, or open
Settings and type “Certification” into the search bar.
Model: 21051182G
2105 indicates that this product will be launched after 202105.
When using this device as a wireless charger it is intended for use as a
desktop device and should not be carried when in this mode.
To comply with RF exposure requirements when using in the wireless
charging mode please place the device at a minimum distance of 20cm
from persons.