Adjusting the legs, Electric connection, Disposing of the packaging – GRAM FS 3215-93/1 User Manual
Page 68: Disposing of your old freezer, Placing and installation
EN
9
Adjusting the legs
If your freezer is unbalanced;
You can balance your freezer by
turning its front legs as illustrated
in the figure. The corner where the
leg exists is lowered when you turn
in the direction of black arrow and
raised when you turn in the opposite
direction. Taking help from someone
to slightly lift the freezer will facilitate
this process.
Electric connection
Connect your product to a grounded
socket which is protected by a fuse
with the appropriate capacity.
Important:
• The connection must be in
accordance with with national
regulations.
• The power cable plug must be easily
accessible after installation.
• Extension cords and multiway plugs
must not be used for connection.
B
A damaged power cable must be
replaced by a qualified electrician.
Disposing of the packaging
The packaging may be dangerous for
children. Keep it out of the reach of
children or dispose of it by sorting
it in accordance with the waste
instructions. Do not dispose of it
together with the normal household
waste.
The packaging of your freezer is made
from recyclable materials.
Disposing of your old freezer
Dispose of your old freezer without
harming to the environment.
• You may consult your authorized
retailer or the recycling depot in your
municpality about the disposal of your
freezer.
Before disposing of your freezer, cut
out the electric plug and, if there are
any locks on the door, make them
inoperable in order to protect children
against any danger.
Placing and Installation
1. Install your freezer in a place that
allows ease of use.
2. There must be appropriate air
ventilation around your freezer in order
to achieve an efficient operation.
3.Place your freezer on an even
floor surface to prevent jolts.
4. Do not keep your freezer in ambient
temperatures under 10°C.